Shopping Cart

Food Processor LLJH005 User Manual English Version

Instruction of Simplus Food Processor


Ⅰ. Main Technical Parameters


Model No.

MFG Code

Rated Voltage

Rated Power

Rated Frequency

Protection against electric shock










Ⅱ. Components and installation drawings 





Ⅲ. Steps of using COFFEE MILL

1) Put the food in the low cup, making sure it does not exceed 100g.

2) Twist the flat blade on the bottom of low cup and fix it on the main body.

3) Plug in the machine. Generally, it can finish grinding in 30 seconds.

4) Unplug the machine once it finishes grinding, then twist off the blade and pour out the food.

Continuous working time for each operation can not exceed 30 seconds.


Blending :

  1. Put the machine on a stable table.
  2. Screw on the cross knife base at the bottom of the blender cup or smart cup.
  3. Firstly adding an appropriate amount of purified water in the blender cup or smart cup, then put the vegetables and fruits which have been cut into small pieces in the blender cup or smart cup, pay attention that the whole mixed volume can not exceed the “MAX” scale-line position of the cup.
  4. Put the lid onto the blending cup, then tighten it clockwise. When using the high cup, just add food into the cup and twist the cross blade onto the bottom.
  5. Plug the machine into 240 volts and make sure the indication light is red.
  6. Put the blending cup on the main body and be sure the upper concave parts fit well to the convex parts on the bottom of the cup, then tighten it clockwise.
  7. Press the switch and be sure the indication light is blue, at that time the machine runs normally.
  8. running time: 1min, Min. rest time: 1min.

  1. Insert “S” blade into drive shaft of container, make sure in the right place.
  2. Clean the meat( pork, beef), then bone off, peel off, muscle off. Then cut into the 2cm*2cm small pieces. Putting into the container.

Attention: processing capacity of food should not exceed 2/3 capacity.

                   Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.

  1. Put on the cover, then tighten it clockwise
  2. Fix the container components to host.
  3. Power the  plug, choose the second speed, the  machine starts to chop,  it will be  finished within 1 min. It is not available to chop too long, to ensure the meat fresh.
  4. After chopping, turn the switch back to zero speed, also plug off, take out the container components, open cover, take out the food.
  5. Please do according to the above information, if need reuse.
  6. Continuous working time for each operation cannot exceed 60 seconds.




Ⅳ. Clean and Maintain

  1. In case of electric shock, you must be sure the machine is power off when cleaning the body.
  2. Clean the main body by wet close instead of water.
  3. It can be used again once you clean up the parts and assemble them well.
  4. The  machine  should  be  used  often,  otherwise  place  it  in  the  dry  and ventilated environment.




Ⅴ. Caution

  1. This machine uses an AC voltage of 220-240V.
  2. Operator must obey a rated intermittent time, it is forbidden to make it idle run or overload
  3. Changing the power cord shall be operated by the professional maintenance personnel.
  4. The blade base should be firmly locked with the cup, or there is a risk of water leakage and cup falling.
  5. The  blade  is very sharp,  pay attention  not to  hurt your  hand when cleaning and disassembling the machine.
  6. It can only be used after the food processor is completely cooled.
  7. The motor of this machine has an over-temperature protection device, the machine will be paused as a result of overheating during operating, at this moment, you should cut off the power supply, restart it till it is completely cooled.
  8. The processing material in the blending cup should not exceed the line of 1250ml while blending.
  9. During operating, it is forbidden to put hands and sharp goods into the feeding port; it is forbidden to use other tools instead of the feeding bar; it is forbidden to keep eyes close to the feeding port to avoid accidental injuries.
  10. Do not directly use water to wash the main engine, and it will cause electrical failure or accident of motor and switch.
  11. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  12. Switch off the appliance before changing accessories or approaching parts, which move in use.
  13. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
  14. Appliances  can  be  used  by  persons  with  reduced  physical,  sensory  or  mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
  15. Children shall not play with the appliance.
  16. CARE when handing the sharp cutting blades, emptying the bowl and during cleaning.
  17. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
  18. Do not use this product to break ice or hard chunks of food (such as whole potatoes, fruits, or animal bones), otherwise the product will be irreversibly damaged and will no longer work.